When shopping for a new Smart TV it’s important to note that the factory default settings may not offer the best picture quality.
In order to enjoy your movies, TV shows or video games to the fullest, it is necessary to calibrate the image and make some changes to the system settings.
So you can calibrate your Smart TV to have the best image
First of all you must know perfectly what is the calibration on a televisionWell, it is a process by which the image parameters of the device are adjusted to achieve optimal and accurate reproduction of the contents.
These adjustments include the contrast, brightness, saturation, hue, and sharpness of the image, as well as the balance of other parameters. In the end, colors are guaranteed to be accurate and details sharper, providing a more immersive and satisfying viewing experience.
Most of today’s smart TVs offer calibration options in their settings menu, but it’s also possible to use expert recommendations for more accurate results.
There is method to calibrate the perfect image that works on any Smart TV, no matter what brand it is, it will allow you to get the best possible quality. To do it, you simply have to access the configuration menu and look for the option called image, image settings either visual quality.
image mode
Televisions generally come with three picture modes available: Standard, Vivid and Cinema. In this section you must forcefully switch to Film or Cinema mode, since it is generally the most accurate and is designed to display the content the way the filmmakers intended it.
However, This cinema mode of your Smart TV is only recommended for use when your television is in a room without much light. On the other hand, if you are in a very bright room, you should go for the vivid or dynamic mode, since it gives a brighter image output.
The colors will not be completely accurate but it is the only way to counteract the ambient light, you can switch to cinema mode at night or with the blinds and curtains down.
Glow
You should set the brightness level around 50%. Setting the brightness too high can cause dark areas to lose detail and the image to appear washed out.
On the other hand, too low a brightness will make the image look too dark, so keeping it at 50% is a good starting point for getting the balance right. Depending on the model of your Smart TV and its technology, you can make variations, always little by little without going overboard.
Backlight
The backlight on a television, especially if it is an LCD or LED, is adjustable and determines the brightness level of the screen.
This way, Increasing the backlight improves the visibility of details in the image, but too high a level can make the lightest parts appear excessively bright.either in a movie or video game.
In the case of OLED TVs, there is no backlight, but you can adjust the brightness through the settings. However, setting it too high can cause image retention, where parts of an image remain temporarily on the screen after the image has changed.
In short, if the TV is in a dark room, decreasing the backlight will help prevent eye strain, while in a bright room it can be increased to improve visibility. But the recommendation is always to keep this feature at a lower level.
Contrast
Contrast determines the difference between the dark and light areas of the image, so higher contrast allows for more depth. By setting it to the maximum, you ensure that the image does not appear too bright or that details in light areas are lost.
Setting it to 100% can enhance the viewing experience by offering higher definition. You should take into account that an extremely high contrast can generate an artificial appearance and make light tones look overexposed, starting from the maximum level, gradually adjust the level until you find the optimal point.
Sharpness
While it can be tempting to increase the sharpness to get a clearer image, in most cases, movies, TV shows, and even video games are already adequately sharp.
It should be noted that too high a value can make the image appear artificial or have over-defined edgesso setting it low or off completely will allow for a smoother, more natural image.
Color
In this section, setting the color level to around 50% will provide a balanced representation of colors on the screen.
Setting a value too high can make the colors appear somewhat exaggerated and unreal., while on the other hand, too low a value can cause the image to appear washed out black and white. So make sure the colors look natural, true to life and you can achieve that by setting this option to 50%, no more and no less.
Tonality
You must make sure that the hue or also called Tint is set to 0% unless you notice an obvious green or red tint in the image. Remember that this feature refers to the balance adjustment between the aforementioned colors.
The default setting to the minimum is usually best, but if you notice excessive tint in your image, you can correct it slightly.
Color temperature or tone
If your Smart TV has the characteristic color tone or temperature, it is important to set it to warm for a more accurate and natural representation of skin tones and colors in general.
The warm tone offers a nicer and more realistic look, so in this context you find the setting too reddish, you can choose to try the setting Half either Normal. In the end, the adjustment should be based on your preferences.
Once you’ve made your adjustments, take some time to view different types of content, as well as assess whether the picture on your TV matches your content preferences. In any case that you are not satisfied with the results, you can seek the assistance of a professional.
Calibrating the image of your Smart TV is important to get the best viewing experiencewith this you can enjoy movies, TV shows and video games with accurate colors, balanced contrast and sharp details.
